• Pick the power package you need: 10 or 15 HP for a 25” WB, or 10 HP or 20 HP for a 37” WB; 10 HP- single PH, 15 or 20 HP- 3 PH
• Heavy frame reduces vibration resulting in better finishes and less machine maintenance
• All controls centralized on front panel at comfortable height with clearly identified buttons
• DRO built into the control panel for precise measurements in decimal inches or millimeters
• Fully adjustable platen that allows contact roller only, platen only, or combination usage• Electronically programmable powered height adjustment on conveyor table
• True variable speed conveyor from 16-62 FPM
• Electronic stock thickness gauge
• Fully adjustable opening from 0”-5” with upper and lower limit safety switches
• De-burring is done with the correct configuration and appropriate abrasives. Wide belts are very effective at removing top burrs.
• De-slagging and dross removal is possible with the correct configuration and appropriate abrasive. This is a very hard deposit around the edges of the stock and may require multiple steps or a multi head sander to completely remove the burr. Brushing may be required to remove any secondary burrs on the edges or inside of holes.
• Straight lining is easily accomplished with the correct machine configuration and abrasives.
• Cleaning and de-scaling. Properly equipped our wide belts can clean parts extremely well.
• Oxidation removal is very effective. Laser or plasma cut parts produce oxidation around the cut. Wide belt sanding followed by brushing is an excellent process to remove oxidation.
• Note: As a rule of thumb, brush sanding generates less heat, creates a “softer finish” and offers much longer abrasive or brush life as compared to wide belt sanding. While wide belt sanding offers more aggressive stock or contamination removal

230/460 VOLT MODELS
(prewired 230)