SuperBrush 24", 36" and 49"
Download the product PDF
Download the Product Manual (PDF)
SuperBrush 24, 36 & the NEW SuperBrush 49
- Graining or decorative finishing is a great application for a SuperBrush sander. This can be accomplished using a nylon or flatter style brush. The best brush choice will depend on desired appearance, condition of the material before brushing, type of material and plating or painting, if any.
- Light de-burring can be accomplished on many materials by utilizing an aggressive wire or nylon brush and can compliment the wide belt sanders as a second step to radius edges and remove secondary burrs left by belt sanders.
- Light de-slagging or dross removal can be achieved under certain conditions with an aggressive wire brush. The material usually needs to be softer or the slag less attached for wire to accomplish this task. Wire brushing is a great second step after initial de-slagging with a wide belt
- Polishing & buffing metal is accomplished using either nylon or Scotch-Brite® heads. This is a great way to bring out the sheen of a surface or finish.
- A modified version of straight lining is accomplished using the brush sander and a nylon or flatter style brush. The brush will generate less heat and better conform to slight differences in thickness and the brush will have a much longer life than compared to abrasives on the wide belt.
- Cleaning and de-scaling can be done with nylon, flatter or wire brushes, depending on the degree of contamination removal and the base material.
- Scuff sanding and primer sanding (base coat sanding) are easily accomplished with either nylon or flatter style brushes. This is much faster and more consistent as compared to hand sanding or scuffing.
- Oxidation removal is accomplished with aggressive wire or nylon brushes, unless very deep when a wide belt is required.
Note: As a rule of thumb, brush sanding generates less heat, creates a “softer finish” and offers much longer abrasive or brush life as compared to wide belt sanding. While wide belt sanding offers more aggressive stock or contamination removal.
| 220 Volt Model | |
| 71267 | SuperBrush 24, 1Ph, (one brush head included) |
| 73267 | SuperBrush 24, 3Ph, (one brush head included) |
| 71367 | SuperBrush 36, 1Ph, (one brush head included) |
| 73367 | SuperBrush 36, 3Ph, (one brush head included) |
| 71497 | SuperBrush 49, 1Ph, (one brush head included) |
| 73497 | SuperBrush 49, 3Ph, (one brush head included) |
| Accessories | |
| 98-0130 | Casters (set of 4) |
| 98-2501 | 25" Infeed / Outfeed tables |
| 98-3701 | 37" Infeed / Outfeed tables |
| 98-0118 | ProScale™ DRO (Digital Depth Gauge) |
| 98-0025 | Lowrider Legs with 4 casters. Lowers machine 5 1/2" |
| Available Brushes | |
| Carbon Steel - Open and dense wound wire | |
| Spring Steel - Fineset wire | |
| Nylon / Silicon Carbide (Typrical Grit - 80, 120, 240) | |
| Fladder Style - Specify Grit (60 - 400) | |
| Additional Brushes Available | |
| *Sample Testing Encouraged | |
| Sanding Capacity | |
| Maximum Width (in) | 24, 36, or 49 |
| Minimum Length (in) | 10 |
| Maximum Thickness (in | 11 (varies with brush style) |
| Minimum Thickness (in) | 1/32 |
| Dimensions (HxWxD/in) | |
| SuperBrush 24 | 52x46x35 |
| SuperBrush 36 | 52x58x35 |
| SuperBrush 49 | 50x71x31 |
| Brush (in) | 9-11 diameter typical; |
| typical bristle length | |
| 1 1/2 to 3" | |
| Brush Speed | Infinitely variable |
| 400-1200 RPM | |
| Dust Hood | |
| SuperBrush 24 | Hinged back steel with |
| 4" vacuum ports | |
| SuperBrush 36 | Hinged back steel with |
| 2-4" vacuum ports | |
| SuperBrush 49 | Hinged back steel with |
| 3-4" vacuum ports | |
| Hieght Adjustment (in) | 3/32 per turn, DepthGauge |
| included | |
| Conveyor Motor | 100 in-lb torque, direct |
| drive D.C. motor | |
| infinitely variable 0-15 | |
| feet per minute | |
| Drive Motor (TEFC) | 5 HP, 1740 RPM; |
| 208-230V, 60HZ | |
| continuous duty | |
| Power Requirements: | 1 Ph, 30 amp service |
| 3 Ph, 20 amp service | |
| Shipping Weights (lbs) | |
| SuperBrush 24 | 525 |
| SuperBrush 36 | 605 |
| SuperBrush 49 | 775 |
