ShopPro 25
Download the product PDF
Download the Product Manual (PDF)
ShopPro 25 Drum Sander
- Continuous-duty 1-1/2HP motor, 110-120 Volt power
- 25” width capacity allows wide sanding in a single pass
- Sand stock as short as 2-1/4”, as thin as 1/32” as thick as 4”
- Exclusive take-up fastener makes changing abrasive quick and easy and keeps the abrasive tight on the sanding drum
- Height adjustment handle makes both radical height changes and minute adjustments for extremely precise sanding thickness control. 3/32” per turn height adjustment
- Precisely dimension stock within .010” across width of sander
- Roller height and downward pres- sure are adjustable, eliminating snipe.
- Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor
- Infinitely variable feed rate, from 0 - 10 feet per minute
- Cast stand, zinc-plated steel bed, cen- terless ground column tubes. Depth gauge with locking stop included
- Minimum of 600 CFM dust collection recommended
- Shipped assembled, some minimal assembly required
- Drum ball bearings are sealed and permanently lubricated
| 110 Volt Model | |
| 725002 | ShopPro 25, 20 amp service required |
| Optional Accessories | |
| 59120 | Abrasive Cleaning Stick |
| 98-0130 | Casters (Set of 4) |
| 98-2201 | Infeed / Outfeed Tables |
| 61-1002 | Poly Conveyor Belt |
| 98-0118 | ProScale™ DRO (Digital Depth Gauge) |
| 98-0070 | Rack-N-Roll (Abrasive Storage Shelf) |
| "Pre-Cut" Abrasives 36-200 Grit | |
| "Pre-Marked" Abrasives 24-200 Grit |
| Sanding Capacity | |
| Maximum Width (in) | 25 |
| Minimum Length (in) | 2 1/4 |
| Maximum Thickness (in | 4 |
| Minimum Thickness (in) | 1/32 |
| Dimensions (HxWxD/in) | 43x46x31 |
| Drum: | 5 x 25 extruded |
| aluminum 1600 RPM | |
| Dust Hood | PVC hood with one 4" |
| vacuum port hinged at back | |
| Ball Bearings (1") | 2 |
| Conveyor Bed | Precision flattened steel |
| conveyor bed reinforced | |
| with 4 steel cross sections | |
| Conveyor Motor | 43 in-lb torque, direct drive |
| 220 in-lb torque, direct | |
| drive D.C. motor, | |
| Infinitely variable 0-10 | |
| feet per minute | |
| Drive Motor (TEFC): | 1 1/2 HP, 3450 RPM |
| 110-120V, 60HZ | |
| continuous duty | |
| Shipping Weight (lbs) | 325 |
View our "Dare to Compare" product comparison sheet. (18K PDF) - Click Here
