Dual Drum 50x2
Download the product PDF
Proscale™
- Displays how much material is being removed per pass
- Displays zero when the desired thickness is reached
- Displays the actual thickness of the stock as it exits the sander
- Standard on 220 Volt Series 50x2 drum sanders (Optional on all other models)
50 x 2 Drum Sander
- Continuous-duty 7-1/2HP motor, 208 - 230 Volt power, single or 3 phase
- SandSmart™ automatic control of the infinite-variable feed rate of the conveyor (0-15 ft./min.)
- Multiple grit sanding in single pass with double drum models
- Precisely dimension stock within .010” across width of sander
- Magnetic starter
- Multiple grit sanding in a single pass
- 50” wide, dual (x 2) drum sanding capacity
- Casters included, (wheel and swivel lock)
- Electric height adjustment, high speed and adjustable speed
- ProScale depth gauge (DRO) in sures proper dimensioning
- Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex”
- Self-cooling drum with abrasive Take-up Fasteners, make changing abrasives quick and easy and keeps abrasives tight
- Sand stock as short as 3-1/2” as thin as 1/32” and as thick as 12”
- Cast stand zinc-plated steel bed, center less ground column tubes
- Minimum of 1800 CFM dust collection recommended
- Shipped assembled, some minimal assem- bly required
- Drum ball bearings are sealed and per - manently lubricated
| 220 Volt Models | |
| 750102 | SuperMax 50x2 dual drum, 1Ph |
| 750302 | SuperMax 50x2 dual drum, 3Ph |
| Optional Accessories | |
| 59120 | Abrasive Cleaning Stick |
| 61-1010 | 50" Poly Conveyor Belt |
| 98-0070 | Rack-N-Roll (Abrasive Storage Shelf) |
| "Pre-Marked" Abrasives 24-200 Grit |
| Sanding Capacity | |
| Maximum Width (in) | 50 |
| Minimum Length (in) | 3 1/2 |
| Maximum Thickness (in | 12 |
| Minimum Thickness (in) | 1/32 |
| Dimensions (HxWxD/in) | 50x71x31 |
| Drum(s): | Extruded Aluminum |
| 5 x 50(2) | |
| Drum Speed | 1600 RPM |
| Dust Hood | Hinged back steel with |
| 3-4" vacuum ports | |
| Height Adjustment (in) | Power and manual |
| controls, 3/32 per turn | |
| ProScale™ digital | |
| read-out and locking | |
| stop included | |
| Ball Bearings (1") | 4 |
| Conveyor Motor | SandSmart™ controlled |
| 220 in-lb torque, direct | |
| drive D.C. motor, | |
| Infinitely variable 0-15 | |
| feet per minute | |
| Drive Motor (TEFC): | 7 1/2 HP, 1740 RPM |
| 208-230V, 60HZ | |
| continuous duty | |
| Power Requirements | 1Ph, 50amp service |
| 3Ph, 30 amp service | |
| Shipping Weight (lbs) | 820 |
View our "Dare to Compare" product comparison sheet. (18K PDF) - Click Here
