25/37 Drum Sander
Download the product PDF
Download the Product Manual (PDF)
Sand Smart Control
- Eliminates the guess-work of manually controlling the infinitely-variable feed speed
- Simplifies the sanding operation
- Provides a consistent finish even with varying grain pattern and density
- Greatly increases abrasive planing and dimensioning speed
- Maintains highest possible feed rate without overload
- Standard on all 220 Volt Series drum sander models
25 and 27, Single and Double Drum
- Continuous-duty 5HP motor, 208- 230 Volt power, single or 3 Phase
- SandSmart™ automatic control of the infinite-variable feed rate (0-15 ft./min.) for the conveyor gives a perfect finish
- Multiple grit sanding in single pass with double drum models
- Precisely dimension stock within .010” across width of sander
- 25” or 37” wide sanding capacity
- Height of the rear drum is indepen- dently adjustable in relationship to the front drum
- Optional ProScale depth gauge allows incredible accuracy
- Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex”
- Self-cooling drum with abrasive Take- Up-Fasteners make changing abrasive quick and easy plus keeping abra- sives tight
- Sand as thick as 12” with 37” models and 6” with 25” models Sand as thin as 1/32” and as short as 2-1/4” (single drum) 3-1/2” (double drum) models
- Cast stand, zinc-plated steel bed, centerless ground column tubes
- Dust Collection- mandatory for all models: 25” - 600 CFM min., 37” 1200 CFM min.
- Shipped assembled, some minimal assembly required
- Drum ball bearings are sealed and permanently lubricated
220 Volt Models
| 733003 | SuperMax 25 single drum, 1 Ph |
| 733103 | SuperMax 25 single drum, 3 Ph |
| 713003 | SuperMax 25x2 dual drum, 1 Ph |
| 713103 | SuperMax 25x2 dual drum, 3 Ph |
| 736003 | SuperMax 37 single drum, 1 Ph |
| 736103 | SuperMax 37 single drum, 3 Ph |
| 737003 | SuperMax 37x2 dual drum, 1 Ph |
| 737103 | SuperMax 37x2 dual drum, 3 Ph |
| Optional Accessories | |
| 59120 | Abrasive Cleaning Stick |
| 98-0130 | Casters* (Set of 4) |
| *Included with 37" models | |
| 98-2501 | 25" Infeed/Outfeed Tables |
| 98-3701 | 37" Infeed/Outfeed Tables |
| 61-1004 | 25" Poly Conveyor Belt |
| 61-1007 | 37" Poly Conveyor Belt |
| 98-0118 | ProScale™ DRO (Digital Depth Gauge) |
| 98-0070 | Rack-N-Roll (Abrasive Storage Shelf) |
| 72-1321 | Magnetic Starter - 1 phase |
| 72-1311 | Magnetic Starter - 3 phase |
| "Pre-Cut" Abrasives 36-220 Grit | |
| "Pre-Marked" Abrasives 24-220 Grit |
| Sanding Capacity | |
| Maximum Width (in) | 25 or 37 |
| Minimum Length (in) | 2 1/4 single drum or |
| 3 1/2 double drum | |
| Maximum Thickness (in | 6-25" model or |
| 12-37" model | |
| Minimum Thickness (in) | 1/32 |
| Dimensions (HxWxD/in) | |
| Model 25 & 25x2 | 43x46x31 |
| Model 37x2 | 43x58x31 |
| Drum(s): | Extruded Aluminum |
| 25" Model 1or 2 | 5 x 25 |
| 25" Model 1 5 | 5 x 37 |
| Drum Speed | 1600 RPM |
| Dust Hood | |
| 25" Model | Hinged back steel with |
| one 4" vacuum ports | |
| 37" Model | Hinged back steel with |
| 2-4" vacuum ports | |
| Height Adjustment (in) | 3/32 per turn, DepthGauge |
| with locking stop | |
| Ball Bearings (1") | 2 per drum (2 or 4) |
| Conveyor Motor | SandSmart™ controlled |
| 100 in-lb torque, direct | |
| drive D.C. motor, | |
| Infinitely variable 0-15 | |
| feet per minute | |
| Drive Motor (TEFC): | 5 HP, 1740 RPM |
| 208-230V, 60HZ | |
| continuous duty | |
| Power Requirements | 1Ph, 30amp service |
| 3Ph, 20 amp service | |
| Shipping Weight (lbs) | |
| 25" Model | 405 |
| 25" x 2 Model | 435 |
| 37" Model | 450 |
| 37" x 2 Model | 485 |
View our "Dare to Compare" product comparison sheet. (18K PDF) - Click Here
